Rheonics have developed pre built .mbp files that will help with the correct settings of the mapped address in modbus when using the Modbuspoll tool/software. To load these files follow the steps.
- Open Modbuspoll tool, and click in “File”
Figure 1. Opening a Rheonics file with all the configuration
2. Double-click on the desired file, below you will find download links for each register.
Figure 2. Selecting .mbp file
- Input registers(Parameter 0 to 13)
- Extended input registers (externally writable modbus register and estimated parameters Parameter 14 to 22)
- 4-20mA configuration registers
- LCD DISPLAY, the following are register from 100-119
- Location configuration registers
Location ID
Location Name
- Ethernet configuration registers and param 14 to 16
- Sensor s/n, Hardware and Firmware version registers
Resources: