What products are involved?
SRV - Inline Viscosity Meter
What is the purpose of this article?
This article provides an overview of the flow through cells available for the Rheonics SRV sensor.
1. IntroductionRheonics inline viscometer SRV can be used with many standard off-the-shelf flow adapters. In addition, Rheonics also offers different flow-through cells custom designed for the SRV sensor probe. These cells are available with different inline/outlet and sensor process connections as detailed in next table. The cells are made of Stainless Steel 316L (1.4435) and are designed to optimize fluid volume in the flow cell, minimize pressure drop and ensure good flow around the sensing element.
| Flow through cells for SRV inline viscometer | ||
|---|---|---|
Flow cell | Sensor connection (Code) | Process connection |
Rated up to 200 bar. Fluid volume: 60 ml
| 3/4” NPT | 3/4” NPT |
Rated up to 690 bar. Fluid volume: 4.3 ml  | 3/4” NPT | 1/4" 9/16-18 UNF threaded |
Rated up to 200 bar. Fluid volume: 60 ml
| 1.5” Tri-Clamp | 3/4” NPT |
Rated up to 500 bar. Fluid volume: 9 ml
| G 1/2” | G 1/2” |
FET-XXT-XXT: Flow elbow shorten tee with Tri-Clamp connection. Available for 1.5” and 2” sizes. E.g.: FET-20T-20T.
| 1.5” Tri-Clamp 2” Tri-Clamp (SRV-X3-20T) Also suitable for the SRV-X5 variant and the SRD probe. | Tri-Clamp |
FET-XXT-XXX: Flow elbow shorten tee with welding ports. Available for 1.5” and 2” sizes. E.g.: FET-15T-XXX
| 1.5” Tri-Clamp 2” Tri-Clamp (SRV-X3-20T) Also suitable for the SRV-X5 variant and the SRD. | Welding |
FTP-15T-XXT: Flow tee spool piece with Tri-Clamp connection. Inlet/outlet available sizes of 2", 3”, 4” and 6”. E.g.: FTP-15T-30T
| 1.5” Tri-Clamp Also suitable for the SRD. | Tri-Clamp |
FTP-15T-XXX: Flow tee spool piece with welding ports. Inlet/outlet available sizes of 2", 3”, 4” and 6” ports. E.g.: FTP-15T-20X
| 1.5” Tri-Clamp Also suitable for the SRD. | Welding |
References:[1]: https://support.rheonics.com/en/support/solutions/folders/81000297658