What products are involved?
SRD - Inline Density and Viscosity Meter
What is the purpose of this article?
This article provides an overview of the flow through cells available for the Rheonics SRD sensor.1. IntroductionRheonics inline density and viscosity meter SRD can be installed on many standard off-the-shelf flow adapters. In addition, Rheonics also offers different flow-through cells custom designed for the SRD probe. These cells are made of Stainless Steel 316L (1.4435) and designed to ensure good flow around the sensing element, optimize fluid volume in the flow cell and minimize pressure drop.
Next table mentions the flow cells available from Rheonics for the SRD.
Flow through cells for SRD density and viscosity meter | ||
|---|---|---|
Flow cell | Sensor connection (Code) | Process connection |
Rated up to 200 bar. Fluid volume: 60 ml
| 3/4” NPT | 3/4” NPT |
Rated up to 200 bar. Fluid volume: 60 ml
| 1.5” Tri-Clamp | 3/4” NPT |
FET-XXT-XXT: Flow elbow shorten tee with Tri-Clamp connection. Available for 1.5” and 2” sizes. E.g.: FET-20T-20T.  | 1.5” Tri-Clamp 2” Tri-Clamp (SRD-X3-20T) Also suitable for the SRD-X5 variant and the SRV probe. | Tri-Clamp |
FET-XXT-XXX: Flow elbow shorten tee with welding ports. Available for 1.5” and 2” sizes. E.g.: FET-15T-XXX  | 1.5” Tri-Clamp 2” Tri-Clamp (SRD-X3-20T) Also suitable for the SRD-X5 variant and the SRV. | Welding |
FTP-15T-XXT: Flow tee spool piece with Tri-Clamp connection. Inlet/outlet available sizes of 2", 3”, 4” and 6” Tri-Clamp. E.g.: FTP-15T-30T
| 1.5” Tri-Clamp (SRD-X3-15T). Also suitable for the SRV. | Tri-Clamp |
FTP-15T-XXX: Flow tee spool piece with Tri-Clamp connection. Inlet/outlet available sizes of 2", 3”, 4” and 6”. E.g.: FTP-15T-30X  | 1.5” Tri-Clamp (SRD-X3-15T). Also suitable for the SRV. | Welding |
References:[1]: https://support.rheonics.com/en/support/solutions/folders/81000297659
[2]: https://rheonics.com/product-accessories/