Rheonics viscosity and/or density sensor probes are connected to the sensor electronics with a sensor cable. A M12 8-pin connection is used on the sensor probe (SRV, SRD, DVP) and 8 pin-terminal connections is used in the sensor electronics (SME).
Visit the next article for the wiring color code to follow to connect sensor cable wires (standard probe) to the electronics: Connecting sensor cable colored wires to transmitter electronics
Sensor cable and connector options for Standard and EX-certified sensor probe
Rheonics sensors are delivered with a sensor cable as configured in the RFQ (Request for Quotation). Users can define the type (straight or 90° angled), length, and if EX certification (explosive environment) is required.
The sensor cable variants are shown below. All cables are shielded and use the same M12 port with 8 pins, A-coded connector.
1. Standard sensor cable with straight M12 connector
Figure 1: Standard sensor cable with straight M12 connector
Specifications:
- Insulation material - Sheath: PUR
- IP Rating: IP68
- Temperature range: -30°C to 90°C
- Molded connector: M12 8-pin Female A-coded Straight
| Description | Lenghts available | Drawing |
|---|---|---|
| Standard sensor cable with straight M12 connector | 5 m (15 ft) 10 m (30 ft) 30 m (90 ft) Custom length (up to 500 m/1500 feet) |
2. Standard sensor cable with 90° angled M12 connector
Figure 2: Standard sensor cable with 90° angled M12 connector
Specifications:
- Insulation material - Sheath: PUR
- IP Rating: IP68
- Temperature range: -30°C to 90°C
- Molded connector: M12 8-pin Female-A-coded 90° Angled
| Description | Lenghts available | Drawing |
|---|---|---|
| Standard sensor cable with 90° angled M12 connector | 5 m (15 ft) 10 m (30 ft) 30 m (90 ft) Custom length (up to 500 m/1500 feet) |
3. Patch sensor cable for HT applications
Figure 3: Patch sensor cable with straight M12 connector for HT applications
Specifications:
- Insulation material - Sheath: PTFE
- IP Rating: IP65
- Max. temperature range: 150°C
- Connector: M12 8-pin Female-A-coded Straight
- Molded connector: M12 8-pin Female-A-coded 90° Angled
| Description | Lenghts available | Drawing |
|---|---|---|
| Patch sensor cable for HT applications with straight M12 connector | 5 m (15 ft) only |
4. IP69K sensor cable and straight M12 connector
Figure 4: IP69K sensor cable with straight M12 connector.
Specifications:
- Insulation material - Sheath: TPE-S
- IP Rating: IP69K
- Max. temperature range: 105°C
- Connector: M12 8-pin Female-A-coded Straight
| Description | Lenghts available | Drawing |
|---|---|---|
| IP69K sensor cable with straight M12 connector | 5 m (15 ft) only |
5. EX sensor cable and straight M12 connector
Figure 5: EX sensor cable and straight M12 connector
Specifications:
- Insulation material - Sheath: Special PVC for intrinsically safe installations
- IP Rating: IP67
- Temperature range: -30°C to 80°C
- Connector: M12 8-pin Female-A-coded Straight
| Description | Lenghts available | Drawing |
|---|---|---|
| EX sensor cable and straight M12 connector | 5 m (15 ft) 10 m (30 ft) 30 m (90 ft) Custom length (up to 500 m/1500 feet) |
Source special sensor cables locally
In addition to the sensor cables Rheonics can provide, user may at times require an special cable that Rheonics may not be able to provide. Special configurations can vary like requirement of PEEK sheath, PUR sheath, high temperature, armoured, extra heavy duty, etc.
To be compatible with Rheonics sensor probes, a sensor cable should comply with the following. If these specifications are met, user can source cables locally for special needs in consultation with rheonics technical team.
| Cable requirements for Rheonics sensor compatibility | |
|---|---|
| 1 | 4 pair of AWG 23 conductors |
| 2 | Twisted |
| 3 | Shielded |
| 4 | M12-8 A-coded female connector |