The sensor is connected to the transmitter electronics by a sensor cable. Follow the color code table below to connect the correct wires from the sensor cable to the sensor connection terminal strip on the transmitter. The leads are delivered with crimped ends; cable can be shortened if needed, but sleeves should be crimped on the stripped ends.
Color code table
Wire Color | Sensor connection terminal # |
Red | 8 |
Blue | 7 |
Pink (Rose) | 6 |
Grey | 5 |
Yellow | 4 |
Green | 3 |
Brown | 2 |
White | 1 |
---not connected--- | 0 |