No LED lights, display, or output signals
Viscosity is not stable
NaN values are displayed on the RCP software or PLC
No data is visible
The measured value is different from my reference standards
Wrong Unit from the data stream
Wrong readings for each parameter
Sensor Status does not match any bit from the sensor status table
Cannot install or do not see device after installation
Follow these steps to handle the issue:
Code 16#012f Connection Request error: Inconsistent application path combination(Only Studio5000)
Incorrect eds file is installed, please check the latest eds file from the support portal. Data sent does not match the data received.
Ethernet/IP troubleshooting Print
Modified on: Sat, 23 Apr, 2022 at 7:33 PM
Did you find it helpful?Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.