Phone: +1 713 234 0863


All rheonics sensors have a ethernet connection with RJ45 port. This section deals with information on how to communicate with SRV, SRD, DVP, DVM over ethernet.

Introducing Ethernet connections on SMET
All Rheonics sensor electronics come with an ethernet port. However whether it is active depends on the communication options you selected during the order....
Thu, 15 Apr, 2021 at 12:08 PM
How connect ethernet cables to the SME-TRD?
SME-TRD uses a transmitter-style housing with a window cover.  For SME-TR, there is no issue using a standard ethernet cable. However, in SME-TRD with a ...
Thu, 21 Apr, 2022 at 7:01 PM
Verifying the network setup on the PC where the RCP software is installed
1. Checking your local IP address 1.1.Open Control Panel Figure 1. Control Panel Search     1.2.Select Network and internet Figure 2. Network an...
Thu, 25 May, 2023 at 12:44 AM
Can I connect to the Rheonics Sensor using a straight-through ethernet cable directly from the computer?
Which Products are Involved? SRV, SRD, DVM, DVP, SME-DRM. For SME-DRM (DIN rail mount) transmitter. Visit Rheonics product page:
Thu, 13 Apr, 2023 at 5:26 PM