The integration of Rheonics sensors with Ethernet/IP protocol offers users a more secure and reliable data exchange between devices. The protocol provides higher levels of security to protect data from external threats, as well as improved reliability to ensure that the data is accurately transmitted.


1. How to set the Ethernet/IP communication on Rheonics Sensor?


  1. It is necessary to have a Rheonics SME with Ethernet/IP communication enabled, for this you will need to order the Ethernet/IP communication protocol prior to the shipment of the sensor or order later. To order the Ethernet/IP communication protocol remember to check the C9-Ethernet/IP option on the RFQ page.

  2. Establishing network settings: Network Setup through USB communication for Rheonics SME

  3. Download the EDS file from this link: EthernetIP EDS file for Rheonics inline viscometer and density meter

  4. Connecting the Ethernet cable: Introducing Ethernet connections on SMET

  5. Verify with one of the tools shown in this support article that the Rheonics Sensor can be detected on your Ethernet/IP network: Software for Ethernet/IP integration with Rheonics Sensors

  6. Rheonics has several examples of how to integrate the SME into an Ethernet/IP network:  Which PLCs are compatible with Ethernet/IP?

  7. With all the setup prepared, the next step is to integrate our sensor with the Ethernet/IP network: Rheonics integration articles

  8. The Rheonics sensor parameters available for Ethernet/IP: Parameter List access for field devices

  9. Check the user manual for information about the Ethernet/IP protocol on Rheonics SME: Rheonics User Manual Ethernet/IP