Rheonics Support

Getting Started 0

Getting started 3

• Configuring the new sensor : from box to operation
• Connecting process density meter and viscometer to leading PLC
• Marking of Rheonics Sensors

SRV 1

• Set density input to SRV inline viscometer for dynamic viscosity and kinematic viscosity outputs

SRD 0

Your documents 0

SRV & SRD Specifications Related 0

SRV 2

• Handling the SRV Sensor
• SRV Sensor from box to operation

SRD 0

DVP 0

DVM 0

SME-DRM 0

SME-TR 0

SME-TRD 0

DTCM 0

STCM 0

RPS 0

RPM 0

Cleaning and Maintenance 1

• How to clean your Rheonics probe?

Design Principle 6

• EHEDG and 3-A
• Hygienic and Sanitary Process Viscometer and Density Meter for inline installation
• Process Viscometer and Density Meter Chemical Compatibility
• Estimating effective shear rate of inline process viscometer SRV and density meter SRD
• Process Connections Rheonics Viscometer and Density meter

View all 6

SR Sensors 0

Density - Concentration Models 0

Process fluid 0

Installation 0

Electrical 0

Field Installation 15

• IP and NEMA rating comparison
• IP rating explained
• Installation Guidelines for inline viscometer SRV and density meter SRD
• Tri-Clamp sizes compatible with Rheonics SR- sensors
• Rheonics SRV - Emerson 7829 Retrofit

View all 15

Process line connection 0

SRV Viscometer Installation 12

• SRV-X1-34N: NPT 3/4"
• SRV-X1-12G: G 1/2"
• SRV-X2: Custom Flange
• SRV-X3: Tri-Clamp
• SRV-X4: Flush sensor for Hygienic and Sanitary applications

View all 12

SRD Density Meter Installation 14

• SRD-X1-34N: NPT 3/4"
• SRD-X1-12G: G1/2"
• SRD-X2: Custom flange
• SRD-X3: Tri-Clamp
• SRD-X4: Flush sensor for Hygienic and Sanitary applications

View all 14

Accessories and adapters 11

• Tri-clamp adapter for Rheonics viscometer SRV and density meter SRD
• How to select the correct Seal Ring for Tri-Clamp adapters?
• SME-TR(D) Transmitter housing bracket installation instructions
• TMA-34N - Installing density & viscosity sensor in Tank - with Rheonics tank mount adapter
• SRV flow through cells

View all 11

Laboratory - Desktop Installation 1

• Using Rheonics process viscometer and density meter as table top instruments

Getting started 4

• Connecting sensor cable to electronics (SMET)
• Best Practices for Cabling Installation
• Sizing circuit breakers for Rheonics SME
• Mitigating EMI impact on Rheonics sensors

SME Electronics 8

• Connecting and disconnecting wires to the terminal blocks on SME electronics
• Connecting sensor cable colored wires to transmitter electronics
• Powering the Sensor - Input power to transmitter
• Transmitter Display Module installation instructions (SME-TRD)
• USB Connection to the Transmitter

View all 8

Sensor Cable 4

• Wire preparation for SME-DRM (Din Rail Mount)
• Cable protection on Rheonics Sensor
• Wire preparation for SME-TR/TRD (Outdoor Mount)
• Rheonics sensor cable and connection variants

EX Installation 6

• SRV inline viscometer EX installation without temperature
• Is it still possible to measure viscosity without connecting the PT1000 to our SRV?
• Topology wiring for Ex sensors
• Wire preparation for Rheonics Ex Sensor
• Enclosure for Sensor electronics and Zener barriers

View all 6

oil & gas 0

4-20 mA 6

• Connecting 4-20 mA outputs
• What can go wrong with 4 - 20mA loops ?
• Setting 4-20mA range for getting the full range while ensuring sufficient sensitivity to viscosity change
• Analog signals setup with the RCP
• How to diagnose and fix your 4-20mA channel output data inconsistency?

View all 6

Modbus RTU (RS-485) 8

• Modbus Organization partnership with Rheonics
• Connecting Modbus RTU (RS-485) outputs
• Modbus Input Registers
• Data-Types (Modbus RTU RS-485)
• Modbus RTU Command and Response Examples

View all 8

Modbus TCP (Ethernet) 8

• Connecting the Modbus TCP outputs
• Modbus TCP/IP Troubleshooting guide
• Modbus TCP - Protocol
• Modbus TCP - Input Registers
• Modbus TCP - Data Types

View all 8

Ethernet 4

• Introducing Ethernet connections on SMET
• How connect ethernet cables to the SME-TRD?
• Verifying the network setup on the PC where the RCP software is installed
• Can I connect to the Rheonics Sensor using a straight-through ethernet cable directly from the computer?

USB 3

• Introducing USB connections on the Rheonics SMET (sensor electronics)
• Nothing is happening when I plug in the USB cable!
• Network Setup through USB communication for Rheonics SME

Display & Bluetooth (DISP-BT) 0

HART 9

• Getting started with HART communication
• HART Fundamentals
• HART partnership between FieldComm Group and Rheonics
• Which variables are offered by Rheonics for the HART protocol?
• HART Troubleshooting

View all 9

Ethernet/IP 10

• Taking the Ethernet/IP road with Rheonics SME
• Getting Started With Ethernet/IP and Rheonics SME
• Ethernet/IP Fundamentals
• Software for Ethernet/IP integration with Rheonics Sensors
• Which PLCs are compatible with Ethernet/IP?

View all 10

PROFINET 9

• Taking the PROFINET road with Rheonics SME
• Getting started with PROFINET on Rheonics devices
• PROFIBUS and PROFINET International (PI) association and Rheonics
• PROFINET fundamentals
• Software for Profinet integration with Rheonics Sensors

View all 9

Log Files 2

• Software logging and importing data into Excel
• On-board Logger (Historian)

Filter 0

RCP - Rheonics Control Panel 13

• Minimum system requirements for installing the Rheonics Control Panel
• Installing the Rheonics Control Panel (RCP) Application
• Installing RCP Lite Installer
• Installing Smart Measurement Electronics (SME) USB Drivers
• Running the RCP Program

View all 13

RPM - Rheonics Process Monitoring 0

RPS - Rheonics Process Solution 0

RPS InkSight - Printing Press Software 0

SME-SD card 0

Remote Support 3

• Using TeamViewer for remote support
• Updating sensor configuration
• Updating sensor firmware

Software Installation 0

Density 5

• How to scale the custom density parameter for an offset in the SRD sensor?
• Linear model - Temperature compensated density
• Polynomial model - Temperature compensated density
• ASTM model - Temperature compensated density
• Density units supported on SRD

Viscosity 9

• Effect of flow rate on the viscosity measurement
• Cup Second Conversion and Coefficients for Rheonics SRV
• Exponential model-Temperature compensated Viscosity
• Polynomial model - Temperature compensated viscosity
• Arrhenius Model - Temperature compensated Viscosity

View all 9

Temperature 2

• How to read the tolerance from the Pt1000 on Rheonics Sensors?
• Temperature units supported on SRV and SRD

Concentration 10

• Brix degree measurement with Rheonics process concentration meter SRD
• Concentration in degree Plato with Rheonics process meter SRD
• Concentration in degree Baume with Rheonics process meter SRD
• Matrix Referral Specific Gravity with Rheonics process meter SRD
• OIML Concentration with Rheonics online process density meter SRD

View all 10

Calibration and Correlation 9

• Calibration for the Type-SR sensors in field, verification and re-calibration
• Scaling SME Parameters
• Modbus Scaling
• Introduction to Correlation scale-up
• How to check the temperature output on the Rheonics sensors and calibrate them?

View all 9

Status 1

• Sensor Error Status and Parameter Status

Parameters and Units 2

• Parameter List access for field devices
• Units translation table for field devices

Rheonics Process Monitor (RPM) 0

Rheonics Printing Solution - InkSight 2

• Inksight TDMS File Processing in Excel
• RPS cup seconds conversion

Analog signals Integration 5

• Analog signal Integration with Micro820
• Analog Signal Integration with Allen Bradley 1794-IE8 Module
• Analog Signal Integration with Siemens 6ES7134-6GD01-0BA1 Module
• Rheonics Sensor Output Analog signal (4-20mA) Integration with LOGO! Siemens PLC
• Rheonics Sensor Output Analog signal integration with Micrologix Family PLC

Modbus TCP integration with B&R X20/Sensor Connection to PLC 1

• Modbus TCP integration with B&R X20 and B&R Automation studio

Modbus TCP/IP Integration with Micro820 1

• Modbus TCP/IP Integration with Micro820

Modbus TCP integration with LOGO! Siemens PLC 0

PROFINET integration of Rheonics devices using TiA portal. 3

• Rheonics Sensor Integration with Siemens PLC S7-1200 using TIA portal
• Diagnostics and Parameter Readings with Profinet
• Rheonics sensor integration with S7-300 and Profinet

PROFINET integration of Rheonics devices using Codesys. 1

• Profinet communication through Codesys

PROFINET integration of Rheonics devices using TwinCat. 1

• PROFINET Communication through TwinCAT 3-Beckhoff

Ethernet/IP Integration with Micro820 3

• Getting Started
• Connected Components Workbench
• Sensor error status

Ethernet/IP integration with Modicon M262 1

• Ethernet/IP integration with Modicon M262

Ethernet/IP integration with Allen Bradly PLC using STUDIO 5000 2

• Installing the eds file in Logix Designer
• Linking tags with Allen Bradley PLC

Ethernet/IP Communication through CODESYS 1

• Ethernet/IP Communication through CODESYS

HART Integration 0

SCADA Software 3

• Modbus TCP/IP Integration with DataFEED OPC Server Modbus
• Rheonics sensor integration with Ignition SCADA
• Additional Material - Ignition

IO-LINK integration 2

• Using IO-Link output from Rheonics Sensors with PACTware
• IO-Link integration with S7-1200 with IO-Link Master SM 1278

Slurry Applications 4

• Managing slurry weight and rheology using inline process density meter and viscometer
• Installation for Slurry Applications
• Milk of Lime (MOL Slurry) - Real-time monitoring and controlling optimum concentration
• Monitoring Battery Slurry Production with Inline Viscometers and Density Meters

Polyurethane Applications 1

• Polyurethane production application

Paint, Ink, Coating Applications 1

• Real-time quality control of paint, ink, coating manufacturing using process viscometer and density meter

Paint, Ink and Coating Applications 0

Adhesives and Sealants 1

• Viscosity inline monitoring of Adhesives and Sealants